1. It is generally best to use a dog collar type dog leash that is elastic and fixable, such as a belt type. You only need to adjust the buckle of the collar to a position that is suitable for the lower part of the dog's neck, because the position of the lower part of the dog's neck is It is relatively difficult to be injured. In addition, the stress point of traction should be controlled around the dog collar, and do not pull hard. The dog collar is relatively easy to wear and the essentials are relatively simple.

2. For a dog harness-type dog leash, you must choose the right size of the gap between the two front legs of the harness. If it is too large or too small, it will not be easy to control the dog's movements. On the contrary, it may cause harm to the dog due to carelessness. Choose Once correct, put the dog's two front legs into the harness-type dog leash loops respectively, and be ready for the first step.

3. After completing the preparation for the second step, consider the tightness adjustment of the dog's back, that is, whether the tightness of the final combined back buckle is reasonable. The adjustment method is similar to a schoolbag strap. Just move the strap through the square metal buckle. Adjust After the tightness is appropriate, just fasten the buckle on the back. In addition, it should be noted that the back buckles are generally located on both sides of the figure-8-shaped strap-type dog leash. If you observe carefully, you will quickly learn how to use it.

4. In addition, be careful not to keep the traction rope tight all the time. This is a very wrong approach. The correct approach should be to keep the rope appropriately relaxed and droop slightly from the dog's collar.